ръководство на потребителя SONY NSA-PF1

[. . . ] It covers a wide range of listening positions, without placing a limit on speaker installation height, listening distance or position. , . The shortcoming of standard speaker systems is their reliance on speaker location. . Narrow listening position To obtain better sound Place the speaker away from surfaces that can vibrate, such as walls. - , ­ . 6 7 The Power of a Single Speaker Experience the dynamism of a live performance and feel the artist's technique through the strong vibrations of the one meter tall organic glass tube. , . The colored illustration of this vibration simulation reveals how the entire organic glass tube resonates. [. . . ] Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS1362, (i. e. , marked with mark or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will 14 help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. For the customers in the UK, Ireland, Malta, and Cyprus Use the AC power cord set (). For safety reasons, the AC power cord set () is not intended for above mentioned countries/regions and shall therefore not be used there. For the customers in the following regions For all other countries part of the European Economic Area use the AC power cord set (). Warning Both power cord sets are not intended to be used in Switzerland and Liechtenstein. About the AC power cord (mains lead) The supplied AC power cord (mains lead) is only for use with this unit (NSA-PF1). Do not use with other components. About the location of the nameplate The nameplate is located on the aluminium pipe (when the sleeve is attached, the nameplate is hidden). Nameplate Inserting batteries into the remote Insert two R03 (size AAA) batteries by matching the and ends on the batteries to the markings inside the compartment. Do not leave the remote in an extremely hot or humid place. Do not drop any foreign object into the remote casing, particularly when replacing the batteries. Wrong usage of the batteries may cause battery leakage or battery rupture. [. . . ] Do not dismantle the unit as dust may accumulate in the glass tube. Avoiding breaking the unit Do not dismantle or modify the unit. Lower the volume to a minimum before you turn on/off the unit, or change the input source. Do not input the following signals continuously: ­ white noise from FM broadcasts. ­ continuous high frequency signals, such as from electronic instruments. [. . . ]